Telescopic Cylindrical Hydraulic Lift Platform , Self Propelled
Work Platform For Stations
1. product description
Telescopic cylindrical aerial work platform by the platform ,
telescopic cylinders, single or dual ladder ladder anti-rotation
mechanism , chassis , fuel tank, legs , walking round and so on.
Platform consists of telescopic cylinder direct lifting, when you
start the motor, the motor driven gear pump oil , the oil through
the check valve and solenoid valve channel input cylinders,
telescopic cylinders is increased by section , when the platform is
raised to the maximum height of the system pressure also reached
the rated working pressure, this time with oil unloading valves ,
hydraulic maintained at a constant working pressure , the check
valve holding pressure after the shutdown , the platform will
remain at the maximum working position , the platform according to
the site 's operating height the maximum height of any of the
following locations to stay.
Platform will fall by gravity through the solenoid valve oil
pressed into the tank. When the solenoid valve is turned on ,
section by section, telescopic cylinders will decline , but also in
the process of decline of people with a high cut off solenoid valve
to stop the decline.
Sets of cylinder type aerial work platform consists of multi-stage
hydraulic cylinder upright jacking , hydraulic cylinder
high-strength materials and good mechanical properties , tower
ladder protection framework , the platform has a higher stability.
Widely used in urban construction , oil, transportation, municipal
, factory and other industries altitude operations
Mainly used for aerial maintenance, checking, changing, cleaning
and theater settings
3. Apply occasion:
Factory, mining, administration, trees cutting, electric lines,
rail ways, road, airport, post, petro, lobby, hotel, chemistry,
space flight, army, nuclear, camera shooting, fire control,
4. Product advantages
1. 220V power and manual lifting are available.
2. Easy to move, lifting height and work height can be adjusted
3. Smart and small area occupation.
4. Double speed dropping system, maximum work height can be 37m,
the stowed lift can be laid down to shorten the height to go though
5. The cylinders are made high intensity steel to insure the
Double support laders, which is a new design to prevent from the
2. Multi-cylinders design, which makes it stop at any height, and
the maximum work height can be 37m.
3. The out-riggers are designed as rectangle 4 points, which
supports the platform more firmly.
4. Air-filled tyres are available, which increases the wear
5. Multi-safety devices, which make the operation more safe